[schroederMP]

Originally Posted by USMC1188 Thanks guys, I will be starting up a build thread for ya on the Chevy here in the next couple days. We are currently trying to figure out an issue with the new cab. It came off an 84 C10 (2WD 1/2 Ton) that had a manual transmission. Our issue is our truck is going to be 4WD with an Automatic, so none of the holes in the center of the floor pan match. What I was thinking about doing is cutting out the section of the floor pan we need off the 86 4WD cab we have and putting it into the C10 cab so that we do not have to try to cut our own holes and end up screwing up the floorpan on the solid cab.

Or you can just rivit sheet metal down...then cut the whole your want. Then cover it all with carpet...easy!