Great pics man! You goin back with bullet this time?
|
Oh yeah 1 3/8" billet input shaft and a south end double disk. my tappets came in today http://i1262.photobucket.com/albums/...l/c517c36f.jpg genuine cummins the only way to go
|
This is the flyweight off the 215 pump I bought notice the two bent rods that's where the governer springs bolt in had to replace the flyweight and now I have a good 215 pump little money easy fix and an awesome pump http://i1262.photobucket.com/albums/...l/98b7ec05.jpg i also cut my rocker pedestals down for the studs the other night so I won't have to clearance my valve covers much if any at all I think they turned out pretty nice http://i1262.photobucket.com/albums/...l/af2aef0b.jpg
|
Sweet man I bet your pumped about getting her back on the road....
|
Oh yeah more than pumped man I can't stand not driving it but it will be worth the wait
|
Sweet truck! Boy that light bar was gay lol ..... Looks mean on them mtzs
|
I was thinkin the same thing Big. And I love lights.
|
Thanks y'all I acctually didn't pay but $200 for them tires from a kid wish I could get deals like that every day and I really like lights too it will be really lit up when it goes back together just not like that all my lights will be sunk into the bumper
|
That's is going to look great! Cant wait to see the pics.
|
And I can't wait to get it done but if you can't tell I'm pic happy with my truck so as soon as its done there will be pics do you think I should go with the smaller round light or the oval lights? led of course
|
That's a tough one... Where exactly are you mounting them and how many were you thinking? Off the top of my head I can see the Oval ones with the double LED in each looking awesome, but it depends where you put them.
|
Yea where at?
|
On the front across the bottom of the bumper but I want then within an inch or two of each other I'm gonna get high count so there will be ten or 15 bulbs in each light and the on the ouch welds down each side hang on a min and I'll post a pic of my chevy it's all lit up... 1/2 ton diesel at that!!
|
Man idk , i dont think itll look good
|
Here it is that's my other baby http://i1262.photobucket.com/albums/...l/0fc4aec4.jpg
|
I frickin love lights, on trucks. That looks great. You have the oval on there and it's perfect. Do Ovals.
|
Wow!!!!
|
I believe that's what I'll do probably look better thanks and big'un I guess you like it??
|
I want a light like KIT from Night Rider. That would look awesome.
|
Is that a company or are you talking about the old show?
|
It's the old tv show man. His car had the red light that went back and forth.
|
Love that show I just didn wanna sound like a moron if that wasnt what you was talking about that would be freakins sweet man!!!
|
Looks like a dam peterbilt bwhaha
|
I like the lights you mount down low below your doors like the big rigs. I saw recon has them. I love their cab lights. Great lookin trucks davenport! Gotta have lights so the morons out there will see ya haha. More lights the better. Plus just looks mean as hell. Im in the process of building my ranch hand style rear cab rack with leds in it.
|
Thanks a lot man a lot of people don't like the lights and I understand that honestly if there not done rite they look like crap IMO. I've always liked the headache racks with the lights in em that is gonna look nice!!!!
|
Quote:
If you like the lights thats all that matters. I like the lights. Just mean lookin. Now if you put lights just anywhere on a truck, then yer goin overboard. Lights can make or break a truck. I've seen those lighted emblems for your grille. I wanted a ford one but cant find them anymore. Always thought those were cool or maybe put some lights behind the grill to make it glow or somethin. |
Quote:
|
Quote:
|
That's gonna be picture worthy!
|
Oh the pictures will be put up for sure! I just made some cool mounts for my dual sport bike I will post up. I bought those Kolpin 1.5 gal fuel cans and mounted them on my bike for my long road trips. Turned out good. Just got it done today. Next is the headache rack since I have some extra cash for the metal.
|
Id like to see your headache rack when its done. Ive been planning mine in my head and I cant decide How I want to do it.
|
Please take no offense to this because I think it would be nice just gonna be hard to do IMO sounds like trying to put 100lbs of $h!t in a 50lb bag but I hope you can do it because it will definitely be cool
|
I was thinking about using 3 inch square tubing, following the angle of the cab, putting "45's" (cutting 2 "22.5" degree agles, im not sure what the actual angle will be without dry fitting it. I was thinking make it about an inch taller than the cab with posts on either side for lumber/ladders. Then 2 uprights welded evenly in the middle, probably right in front of the seams for the slider. I may leave it empty, or do some expanded metal, or something else. I cant decide. Id like to follow a protech as closely as possible except it will be square tubing instead of the corners being beveled.
Talking about it is easier than executing it ha ha. Luckily my buddy used to be a fabricator for a door milling company, he used to fab up frames, tables, binding tables, all kinds of things. He said hed give me a hand. I have my own welder, but I work with wood, and wood has tolerances, metal does not and I have a tough time with that. |
Yea wood is more forgiving. With metal I just measure and check over and over and do alot of tack welding to make sure. The frame turned out awesome. Perfectly square. I even drilled two holes in it to hide my tail light, back up, and work lights for the clean look.
|
I really hope it works out for you man that is gonna be awesome I can't wait to see it!!
|
http://i1262.photobucket.com/albums/...l/e2db7d5a.jpg http://i1262.photobucket.com/albums/...l/0531acc6.jpg 1 3/8" billet input shaft one of the simplest things I've done so far it took my longer to get it out of the foam it was sandwiched in inside the box than it did to put it in. about 30 mins total
|
http://i1262.photobucket.com/albums/...l/89133e11.jpg it's finally all going back together hopefully it'll be in by Sunday then I've just Gta wait on my injectors to arrive
|
:peace:
|
Awesome man!
|
All times are GMT -4. The time now is 07:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimisation provided by
DragonByte SEO v1.1.2 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.